Subject | Text |
| Set shuts down intermittently and has to be unplug and replug for it to restart
replace C832 USE 3 |
| [quote:627ac39644="FalconFour"]Thanks!! :D
I already replaced the two resistors RP30 & RP31; |
|
Dell D1626HT Sony trinitron monitor.. needs fix please help | okay. im a micro-electronic engineer student in australia and i'm trying to fix my friends monitor. |
| You could have a bad tuner.
Part # 859825400 Vendor: SONY
TUNER (BTF-WA402) WAS 859825410
You |
60" Philips Rear Projection SSB Module Question | I need a new SSB Module board in my Philips 60" television. Can anyone tell me whether this in |
All Power Sources in House Pick up Radio Frequency...help | Okay so I noticed when I was hooking up my stereo that even when it is on standby, if I put my ear u |
Uniden EXP970 continuously ringing | Hi
I have 3 years old never used Uniden EXP970 cordless phone.
If I connect it to the charger, |
Re: Same Problem | I am also having the same problem, the power light goes no and off like flashing. At the past we put |
Canon IXUS 300 Service Manual Wanted | Has any of you kind people got a Complete Service Manual for a Canon IXUS 300?
I am looking for |
| replace q906 on main pcb with 2sc2001, original transistor is smd and not up to the job, 2sc2001 is |
How to protect the IPC- M-109 and the industrial component | The plastic sealing and packing is becoming a standard way when the electronics component develops t |
| what square is D701 in, in the complex assembly diagram?
yes i have a soldering iron and know h |
| Hi,
Sometimes its due to bad joints in the soldering of tuner module to the main board. Try re-so |
| I have the same problem with this TV. I'm no electronics guru, but I can use a voltmeter and a sold |
jvc MX-J700 STERIO | Hi,
I have a MX-J700 sterio in the 3 CD component is not working.
I put cd on it in spin about |
Playstation 2 | Hi. I have a play station 2, and i had a code for my doughter to watch DVD 's now forgot it ,is th |
| Sadly IC706 is an SMD component afterall, so floating one point is not as easy as I would have liked |
|
| [quote:1eac85022f="gary"]r5056 is 680r, r5046 is 820r and r5068 is 680r all at 3w. they burn up beca |
Please help : My Panasonic television isn't well at all! | About 3 weeks ago, my Panasonic TV started to switch to standby mode quite regularly and, during the |
Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
Re: Another loose connection | Well, availiable is such a strange word, but I have it though. Post your e-mail here, I will mail it |
Phone PBX Executech mauals | I "bought" a manual from an ebay auction for a PBX system. Though the guy advertized it as an "origi |
| You should have tried [url=www.jimsantennas.com.au]tv tuning[/url] for your Toshiba TV.
There m |
| Hello,
replace all the SMD electrolitic capacitor.
Regards, Niko. |
| i have solve problem , found damaged:
Resistor 3652 22ohm e R3483 SMD, T7641 e T7652(BC847B)! |
| Hi
3189 no working:(
There are 2 eeprom: M95320 smd + 25P10 smd
Where is a code? Eeprom or |
| I do not agree with Dfarhen, if you do not know what you are doing or do not have a tester for the c |
| poor soldering on frame ic would usually cause set to shut down with error code of 13, and picture w |
sony kv 27ts35 shuts down on cold start | Hi, I have a sony kv 27ts35. It shuts down on a cold start. If I give it a love tap it stays on for |
Pioneer DV-F727 not reading discs. | i have a pioneer dv-f727 that is not reading discs. i took it to a repair
shop a couple weeks ago, |